-
Single-Lip Oil Seal: Technical Analysis and Application Guide for Chloroprene Rubber Lip + Metal Case
In industrial rotary sealing applications, the single-lip oil seal (single-lip radial shaft seal) serves as a core component for preventing fluid leakage and excluding contaminants under medium-speed, low-pressure conditions. Combining a chloroprene rubber (CR) sealing lip and a metal case,...Read more -
Sealing Guardian at -200°C Liquid Nitrogen & 20MPa High Pressure: Selection Guide for 110×3.2mm Metal Sealing Rings
In harsh environments subjected to both cryogenic temperatures and ultra-high pressure—where the medium is liquid nitrogen (boiling point: -196°C), operating temperature drops to -200°C, and pressure reaches 20MPa (~200 atm)—the failure of any sealing component could trigger catastrophic consequ...Read more -
Butterfly Valve Seals: Structure, Materials & Application Analysis
Butterfly valves are widely valued for their cost-effectiveness and rapid actuation, where seal performance directly dictates valve reliability and lifespan. Seal designs vary significantly, each suited to specific operating conditions. This article examines core seal structures, materials, an...Read more -
Metal Wound Gasket: The Core Sealing Solution for High-Temperature/High-Pressure Flange Connections
Metal wound gaskets are the most widely used and reliable sealing solution for industrial piping and equipment flanges. Their unique, mature structure delivers exceptional sealing performance under high temperature, high pressure, and cyclic conditions, making them indispensable in power ...Read more -
Star Seal Ring (X-Ring): A High-Performance Sealing Choice for Hydraulic and Pneumatic Systems
The Star Seal Ring (X-Ring or Quad-Ring) is a high-performance sealing element widely used for reciprocating motion in modern hydraulic and pneumatic systems. Its unique design delivers superior sealing performance in numerous applications. 1. Core Structure Analysis The Star Seal Ring derives...Read more -
Y-Seals: Core Sealing Elements in Hydraulic & Pneumatic Systems
Y-seals are pivotal in fluid power systems due to their distinctive Y-shaped cross-section. This structural design balances functionality and reliability for specific operational conditions. I. Structural Characteristics Key design features: Single-lip sealing: Primary sealing lip contacts m...Read more -
Seals for Flammable Gases: Critical Barriers for Explosion Safety
In industries like petrochemicals, natural gas transport, hydrogen energy, and industrial gas systems, sealing flammable gases (methane, hydrogen, propane, etc.) is a matter of life and asset safety. Standard seals risk ignition via permeation, friction heat, or high-temperature failure. Flamma...Read more -
Replacing Metal Seals with Rubber Seals: Critical Considerations and Guidelines
Replacing metal seals with rubber seals is common in equipment maintenance or retrofits (e.g., to reduce costs, simplify installation, or adapt to specific media). However, the significant differences in physical and chemical properties between metal and rubber can lead to seal failure or ...Read more -
LNG Seals: Guardians of the Cryogenic Realm
In the LNG industry chain—spanning production, storage, transportation, and end-use—systems operate under extreme conditions: -162°C cryogenic temperatures, medium-to-high pressure, and flammable/explosive environments. Conventional seals fail catastrophically here, risking leaks. LNG-specifi...Read more -
PTFE Bellows: The Flexible Guardian in Demanding Chemical Environments
In sealing and transfer systems handling highly corrosive media, extreme temperatures, and ultra-clean requirements, traditional materials often fall short. Polytetrafluoroethylene (PTFE) bellows, with their unique structure and material properties, have become critical components for solving ...Read more -
Double-Lip Oil Seal (Main Lip with Garter Spring + Secondary Dust Lip + Stainless Steel Casing): Structural Analysis and Application Guide
In the field of industrial rotary shaft sealing, the double-lip oil seal (featuring a main sealing lip energized by a garter spring, a secondary dust lip, and a stainless steel casing) is a classic, reliable, and widely used sealing solution. Its design ingeniously integrates multiple key ele...Read more -
Spring-Energized Unbounded Oil Seal (FKM + Fabric Reinforcement): A Practical Analysis of Critical Rotating Shaft Sealing
In rotating shaft sealing, spring-energized unbounded oil seals are widely used for their simplicity, ease of installation, and reliability. Among them, designs featuring Fluorocarbon Rubber (FKM) as the primary material, embedded FKM-coated fabric reinforcement layers, and a garter spri...Read more