Stainless Steel O-Rings Corrosion Resistant Shaft O-Rings Metal O ring

● The physical and mechanical properties, PTFE is relatively high density, almost non-absorbent. Without tough resilience. It has a very small friction factor, showing excellent lubricity. PTFE static friction factor than the dynamic friction factor is less, and the ultra-low temperature to the melting point, the friction factor is almost unchanged. However, low hardness susceptible to other PTFE materials wear. If it can form a layer on the surface of the grinding material PTFE film, which reduces the amount of wear of PTFE to a considerable extent.

● Heat resistance, thermal stability of PTFE lies in the engineering plastics is extremely prominent. At 200 ℃ to the melting point, the decomposition very slow, very small amount of decomposition, heated at 200 ℃ month, less than a millionth of the amount of decomposition, is negligible. PTFE at -250 ℃ still crisp. Long-term use in -250 ~ 260 ℃.

● The electrical properties, PTFE is a highly non-polar material, with extremely excellent dielectric properties, prominently when more than 0 ℃, dielectric properties and does not affect the frequency with temperature, humidity and are not subject to influence of corrosive gas . PTFE volume resistivity and surface resistivity is the highest of all plastics, even after prolonged immersion in water, it will not drop significantly, at 100% relative humidity of the air, the surface resistivity remains unchanged. Crystallinity of PTFE at 50% to 80%, the dielectric strength is almost independent of the degree of crystallinity, and having the lowest dielectric constant. PTFE excellent arc resistance.

● Owing to the presence of our expert team members, we have been able to manufacture and supply a wide assortment of cup seal. These are extensively used for steam, oil, water, in other chemical applications. Our cup seals are extensively acclaimed as a perfect pressure-energized seals which ensure good flexibility. These can be easily fitted with a high degree of preload to maintain sealing at very low pressures. Following the demands of clients we provide these in various dimensions and specifications.